Fastenings for ventilated facades - Series R
Anchorage systems for ventilated facades
The anchoring system Series R is totally made of aluminum EN AW 6060 T6. This anchoring system is the best solution for ventilated façade in thin panels with big dimensions. The panels must be drilled.
The panel are fixed by means of rivets. The rivets are visible and they can be painted according to the panel colour.
The load bearing bracket type L are available in different dimension according to the insulation thickness and the air gap between the cladding and the wall.
The vertical mullions are available in two different colours, natural grey or black anodized.
The anchoring system is composed of vertical profile “T or L” in aluminium EN AW 6060T6, cut along the whole length according to the project requirements.
The vertical profiles are fixed to the wall at a certain distance each other (normally in the middle of the vertical joint of the cladding) by means of special bracket plate L shape in aluminium EN AW 6060 T6. The bracket dimension is calculated according to the load and the shape is studied to reduce the thermal bridge. The load brackets are fixed to the structure in concrete by means of anchors (mechanical or chemical) and allow an adjustment of ±20 mm of the vertical alignment. The vertical profile is also fixed along the wall by means of intermediate L bracket and anchors according to the wall material.
The cladding is supported by means of stainless steel or aluminium rivets fixed directly on the vertical profile. The rivets are visible so, if needed, the rivets could be painted in color similar to the cladding.
Series R – Fastenings for ventilated facades certifications
All the anchoring system elements are produced following high standard of quality according to ISO 9001 and are also CE certified according to the UNI EN 1090.
OUR references
The product Fastenings for ventilated facade – Series R has been used for the realization of several projects.
Find out more!