Fastenings for ventilated facades - Series EASY FIX
Anchorage systems for ventilated facades
The anchoring system Series Easy Fix is based on horizontal profile. This anchoring system is the best solution for ventilated facade in thin ceramic or thin stone or for every type of cladding where it is not possible to realize a groove, so called “kerf” for the fixing.
This anchoring system is specially designed to allow the fixing of the cladding panel by means of a special clip. The clips type EASY FIX are inserted in special cuts carried out along the two lateral sides of the panel. With this special clip it is possible to hang the panel on the horizontal profile type S3.
This anchoring system is designed to allow the independent installation or dismantle of any panel.
The vertical mullions are available in three different types and dimensions according to the project and the static calculation.
The horizontal profiles type S3 are produced in aluminium EN AW 6060 T6. They are also available in two different colours, natural grey or anodized black.
The anchoring system is composed of vertical C shape profile type K2 (X) in steel (Y) cold formed and with slot on the backside, distance 50 mm from slot to slot, cut in bar of exact length according to the project requirements. The vertical groove along the vertical profile allows, with the use of special nut, the front connection of the cladding tile and the fast correction of the level and alignment.
The vertical profiles are fixed to the wall at a specific distance each other (normally in the middle of the vertical joint of the cladding) by means of a steel special bracket (Y), i.e. plate OMEGA shape. The bracket dimension is calculated according to the load and the shape is studied to reduce the thermal bridge. he load brackets are fixed to the structure in concrete by means of anchors (mechanical or chemical) and allows an adjustment of ±20 mm of the vertical alignment. The vertical profile is also fixed along the wall by means of threated bar and anchors according to the wall material.
The clip type EASY FIX on the tile will be installed in specific cut done on the two lateral sides of the cladding panel. It is possible with this special clip is to hang the panel on the horizontal profile type S3 in aluminium installed on the vertical profile.
Series easy fix – Fastenings for ventilated facades benefits
This anchoring system is designed to allow the independent installation or disassembly any panel: this is very important during the construction activity or/and for maintenance.
All the elements are produced in the exact length according to the project, with hole and slot: to reduce at minimum the use of electric equipment on site, to speedy up the installation on site, to allow easy levels regulation and alignment, to allow thermal expansion.
Series easy fix – Fastenings for ventilated facades certifications
All the anchoring system elements are produced following high standard of quality according to ISO 9001 and are also CE certified according to the UNI EN 1090.
Series Easy fix – Fastenings for ventilated facades materials
- Vertical profile Type (X) : K1, K2, GL32, 7040
- Vertical profile and load bearing plate material (Y): carbon steel sendzimir galvanized Z275, carbon steel electrolytic galvanized, carbon steel hot dip galvanized, stainless steel AISI 304 (A2), stainless steel AISI 316 (A4), stainless steel AISI 430, aluminium EN AW 6060T6
- Cladding plate material (Z): aluminium EN AW 6060T6 natural, anodized or black anodized.
- Horizontal profile type(W): S3
OUR references
The product Fastenings for ventilated facade – Series Easy Fix has been used for the realization of several projects.
Find out more!